Product Details:
Payment & Shipping Terms:
|
Temporary Fencing Hire Fencing
Movable temporary fencing for construction projects and the hire industry often shipped in 40' containers. These fully fabricated systems are ready to use on any construction site or by any hire company. All mesh and pipe is fully welded galvanized steel with the inclusion of the plastic feet which are filled with sand or water. They are strong and will provide use over and over again. We also offer a service to ship these in pre purchased second hand containers which reduces the overall shipping cost and provides a good construction site office as a bonus.
Temporary Fence is used where building a permanent fence is either impractical or unneeded. Temporary fencing is used when an area needs barriers for the purposes of public safety or security, crowd control, theft deterrent, or equipment storage. Its most common use is as construction hoarding for security fencing around building sites. Other uses for temporary fencing include venue division at large events and public restriction on industrial construction sites. Temporary fencing is also often seen at special outdoor events, parking lots, and emergency/disaster relief sites.
Common forms of temporary fencing include a variety of plastic fencing or panels constructed of chain link, steel or wire. Fencing commonly consists of individual panels that can be set up around the perimeter of the desired area to be fenced in.
“Smart Panel 2400” – 2.4 Welded Mesh Panel
Panel Size: | 2400mm(L) x 2100mm(H) |
Frame: | 32mm O.D. |
Infill Mesh: | 150mm x 60mm spacings |
Finish: | Hot Dipped Galvanised |
“Maxi Panel 2400” – 2.4 Welded Mesh Panel
Panel Size: | 2400mm(L) x 2100mm(H) |
Frame: | 32mm O.D. – 2mm Pipe Wall Thickness |
Infill Mesh: | 4mm horizontal, 4mm vertical 150mm x 60mm spacings |
Weight: | 22kgs |
Finish: | Hot Dipped Galvanised to Australian Standard – 42 Microns |
“Maxi Panel 3300” – 3.3 Welded Mesh Panel
Panel Size: | 3300mm(L) x 2100mm(H) |
Frame: | 32mm O.D. – 2mm Pipe Wall Thickness |
Infill Mesh: | 4mm horizontal, 4mm vertical 150mm x 60mm spacings |
Weight: | 30kgs |
Finish: | Hot Dipped Galvanised to Australian Standard – 42 Microns |
Contact Person: Ms. April
Tel: 13731127302