Brickwork Reinforcement Mesh,Coil Lath,Expanded Brick Mesh

Reinforced brickwork is preferable to un-reinforced brickwork in all types of buildings. When embedded into the normal thickness of a brickwork-joint at every third joint, it forms an integral structure, which is strengthened against vibration, temperature change and tensional stresses (especially on reclaimed ground).

 Advantages

• It is expanded steel mesh with continuity of steel.
• It has no joints, welds or interweaving to fail under stress.
• The mesh is anchored immovably so that the reinforcement cannot slip under tension.
• This is the only type of brickwork reinforcement to give such a unique combination of all these advantages.

LAYING INSTRUCTIONS

• The mesh should be laid flat and set in the brickwork-joints. The reinforcement must be completely embedded in mortar.
• To be assured of its effectiveness, it is normally laid on every third brickwork-joint.

Overlapping must be at least 75mm (3").